New Video Recorder Timer - TechniSat HDFS Owner's Manual

13.2.2

New video recorder timer

The video recorder timer allows you to set the receiver so that it switches to the
correct channel and prevents you from changing channel, so you can video a
programme with an external recording device.
Set the video recorder timer as follows:
> Use the up/down arrow keys and the OK key to select either TV List or
Radio List from the dropdown.
> Use the up/down arrow keys and the OK key to select the channel from
the channel list dropdown.
> Use the left/right arrow keys to move the highlight to the 'Date' field and
use the number keys to enter the broadcast date of the programme.
> Use the left/right arrow keys to move the highlight to the 'Start' field and
use the number keys to enter the start time of the programme. Format
is hour/min (hh/mm).
> Use the left/right arrow keys to move the highlight to the 'Stop' field and
use the number keys to enter the finish time of the programme. Format
is hour/min (hh/mm).
> Use the up/down arrow keys and the OK key to specify the repeat opti-
on from the 'Repeat' dropdown. The options are as follows:
• 1x – activate the timer only once.
• D – activate the timer at the same time every day.
• 1 W – activate the timer every week.
• 1-5 – activate 5 days a week (mon-fri).
• 6-7 – activate 2 days a week (sat-sun).
50