Timer Menu In The Epg - TechniSat HDFS Owner's Manual

and ensures your receiver is ready on the correct channel in good time so that
your recording equipment does not miss the start or end of your programme.
The following options can be set:
> Use the up/down arrow keys to select 'Timer pre-roll time [min]' and
type in the number of minutes you want to activate any timer before the
defined Start time.
> Use the up/down arrow keys to select 'Timer post-roll time [min]' and
type in the number of minutes after any timer End time you want the
timer to stay active for.
> Press the blue 'Help' key to view a help screen.

13.3 Timer Menu in the EPG

To access the timer menu in the EPG:
> Press the red key in any EPG view to display the timer popup. The
options are the same as described above in section 13.2.
> Use the up/down arrow keys and the OK key to select a timer option.
55