Fargo DTC4500 User Manual page 53

© 2010 HID Global Corporation
Selecting the Advanced Settings tab
Setting
Enable Swift ID over a
USB connection
DTC4500 Card Printer/Encoder User Guide
Option
Check this item to utilize Swift ID via a USB connection.
When this box is checked the Ethernet connection (if
applicable) on the printer will not be operational.
•
If the USB selection is not be accessible, the HID EEM
driver that Swift ID uses to connect via a USB
connection has not been installed.
•
This driver can be found on the installation CD or it can
be down loaded from the HID Global support page.
•
The easiest method for enabling Swift ID is to un-
install the printer driver and its components and go
through the installation procedure.
Select the desired connection type for the Swift ID
application: USB or ETHERNET.
All rights reserved
L001444 Rev1.0
53