Fargo DTC4500 User Manual page 105

© 2010 HID Global Corporation
Troubleshooting with the Error Message Table
Error Message
# 100
Ribbon RFID Error
# 102
# 103
# 104
#3
Headlift Error
# 106
Job Data Error
# 107
Printing Error
DTC4500 Card Printer/Encoder User Guide
Cause
There is no Ribbon or the
Ribbon tag information is
corrupted or incorrect.
This is a problem with the
Printhead Lift.
The print data sent to the
Printer is corrupt or has been
interrupted.
An error was detected during
printing.
Solution
Verify the Printer Driver settings
for correct Ribbon.
• Try a new Ribbon and
continue.
• Press the ON/OFF button to
cancel.
Reset the Printer and try again.
• If this problem persists, call
for technical assistance.
Check the interface cable.
Select the ON/OFF button to
cancel this print job and then
resend the job.
Reset the Printer and try again.
• If this problem persists, call
for technical assistance.
All rights reserved
L001444 Rev1.0
105