Fargo DTC4500 User Manual page 49

© 2010 HID Global Corporation
Selecting the Advanced Settings tab
Setting
Ribbon Calibrate Green
Ribbon Green LED Level
Ribbon Calibrate Blue
Ribbon Blue LED Level
Ribbon Print Tension
Flipper Home Offset
DTC4500 Card Printer/Encoder User Guide
Option
This is a calibration driven value and should not be
adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
This is a calibration driven value and should not be
adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
This is a calibration driven value and should not be
adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
This is a calibration driven value and should not be
adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
Use the Ribbon Tension option to increase or
decreases the amount of tension (drag) on the Ribbon
during printing.
This is a calibration driven value and should not be
adjusted. If the Flipper unit is replaced and has not been
calibrated, this value may need to be adjusted.
(Note: This is factory set and should not be changed
unless directed by a technician.)
All rights reserved
L001444 Rev1.0
49