Selecting The Calibrate Ribbon Tab - Fargo DTC4500 User Manual

© 2010 HID Global Corporation

Selecting the Calibrate Ribbon tab

The two buttons for the Calibrate Ribbon tab are described below.
• Calibrate button: Sends the Calibrate Ribbon Command to Printer. Follow the instructions below to
set up the Printer.
• Help button: Launches help specific to this tab.
Step Procedure
1 Select the Calibrate Ribbon tab.
a. Ensure that the Ribbon is removed from the Ribbon Drawer.
b. Ensure the Printer's Ribbon Drawer is closed.
c. Ensure the Printer's Cover is closed.
d. Click on the Calibrate button. (Note: The Printer's LCD will display
CALIBRATE PASSED.)
e. Click on the OK button (on the driver window) to complete the
procedure.
DTC4500 Card Printer/Encoder User Guide
All rights reserved
L001444 Rev1.0
43