Aleratec 1:11 HDD Copy Cruiser IDE/SATA User Manual page 52

Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
Adv Setup: Burn In
This function is used to burn in all HDD
1. Press and hold ESC for about three seconds to access the "Adv Setup"
menu. The following screen will be displayed.
11. Adv Setup
2. Use the arrow buttons (or) to select "Burn In". You will have four
Burn In options.
11-09. Adv Setup
Burn In
3. Press ENT to display the current configuration setting. A screen similar to
the following will be displayed.
Burn In Mode
Copy & Compare
Burn In Mode
Compare
Burn In Mode
Async Cpy & Cmp
Burn In Mode
Async Compare
Use the arrow buttons () to select an option, press ENT and Burn In
4.
will begin. After changing a setting, remember to press ENT to save it.
46

ENT ESC


ENT ESC


ENT ESC


ENT ESC


ENT ESC


ENT ESC

www.aleratec.com