Rescan Bus - Aleratec 1:11 HDD Copy Cruiser IDE/SATA User Manual

Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu

ReScan Bus

The "ReScan Bus" function causes the 1:11 HDD Copy Cruiser IDE/SATA to
redetect connected hard drives. This can be used when you change drives without
restarting the system.
1. Use the arrow buttons (or) to select "ReScan BUS". The following screen
will be displayed.
6. ReScan BUS
Press ENT to select. The system will prompt you to confirm that you wish to
2.
proceed.
ReScan BUS Now?
Yes
Press ENT to begin the rescan, during which the following screen will be
3.
displayed.
Detect Drives
Please wait...
Note: The order of scanning is CH:0 ~ CH:4.
4. When the rescan is complete, the following screen will be displayed.
Bus re-scan OK!
Found 6 Devices

ENT


ENT


ENT


ENT

www.aleratec.com
ESC
ESC
ESC
ESC
19