Prescan Source - Aleratec 1:11 HDD Copy Cruiser IDE/SATA User Manual

Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu

PreScan Source

The "PreScan Source" scans the source hard drive to determine if it can be read
correctly.
1. With the source HDD loaded, use the arrow buttons (or) to select "PreScan
Source". The following screen will be displayed.
5. PreScan Source
Press ENT to begin the scan. The system will auto-detect the hard drives.
2.
Detect Drives
Please wait...
During the PreScan process, the 1:11 HDD Copy Cruiser IDE/SATA will
display progress information.
Scan-52MB/s
236.4GB
3. When the PreScan is complete, a job status screen will be displayed.
PreScan OK!
18
ENT
ENT
0%
ENT
1:15:04
ENT
www.aleratec.com

ESC


ESC


ESC


ESC
