Aleratec 1:11 HDD Copy Cruiser IDE/SATA User Manual page 47

Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
Adv Setup: Quick Erase HDD
This function is used to erase the data of a hard drive quickly.
Warning: Backup any important data before using this function.
Press and hold ESC for about three seconds to access the "Adv Setup"
1.
menu. The following screen will be displayed.
11. Adv Setup
2. Use the arrow buttons (or) to select "Quick Erase HDD". The
following screen will be displayed.
11-04. Adv Setup
Quick Erase HDD
3. Press ENT, and then use the arrow keys () to select a hard drive to
erase. An example is shown below.
1 Target
HDS721616PLA380
Press ENT, and you will be prompted whether you wish to proceed. Use
4.
the arrow keys () to select "Yes" or "No". The following screen will
be displayed.
All data will be
lost, erase? No
5. Press ENT and the Quick Erase will begin. Once complete the following
information will be displayed.
Erasing Target
Please Wait...

ENT


ENT


CH:1
ENT


ENT


www.aleratec.com
ESC
ESC
ESC
ESC
The Selected HDD
Erase Finished
41