Adv Setup - Aleratec 1:11 HDD Copy Cruiser IDE/SATA User Manual

Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu

Adv Setup

Adv Setup: Read Error Skip
This function can be enabled to ignore any error that occurs during copying.
By default, the 1:11 HDD Copy Cruiser IDE/SATA will halt the copy operation
when it encounters an unreadable area of the source hard disk and display an
error. Enabling this option will ignore any bad sectors on the source hard drive
by skipping over them.
Warning: Setting this function to "On" may result in corrupt data on
copied hard drives.
1. Press and hold ESC for about 3 seconds to access the "Adv Setup" menu.
The following screen will be displayed.
11. Adv Setup
2. Use the arrow buttons (or) to scroll to "Read Error Skip". The
following screen will be displayed.
11-01. Adv Setup
Read Error Skip
Press ENT to display the current configuration setting. The default setting
3.
is "Off".
Read Error Skip
Off
4. Press the arrow buttons (or) to toggle the option "On" or "Off".
changing a setting, remember to press ENT to save it.
38
ENT
ENT
ENT
www.aleratec.com

ESC


ESC


ESC

After