Aleratec 1:11 HDD Copy Cruiser IDE/SATA User Manual page 40

Using the 1:11 HDD Copy Cruiser IDE/SATA
Main Menu
Setup
Setup: Auto Start Drive -
Setup: Auto Start Timer -
Setup: Tolerance Size
This function is to set the HDD capacity tolerance between the source and
target.
1. Use the arrow buttons (or) to select "Setup". The following screen
will be displayed.
10. Setup
2. Press the arrow buttons () to scroll to "Tolerance Size". The following
screen will be displayed.
10-11. Setup
Tolerance Size
3. Press ENT to display the current configuration setting. (Off or 1 - 100%)
Tolerance Size
Off
4. Use the arrow buttons () to change the setting.
default, remember to press ENT to save it.
34
(Not Supported)
(Not Supported)
ENT
ENT
ENT
www.aleratec.com

ESC


ESC


ESC

Once you change a