Ethernet configuration
See the section entitled Ethernet configuration under Direct Connection.
Aliases
See the section entitled Aliases under Direct Connection.
Cable Modem
To connect to the Internet using a cable Internet service, select Cable Modem from the
Change Type pull-down menu for the interface that connects to your cable modem.
Cable Modem connections have the interface firewall class of Internet.
If you have not already done so, connect the appropriate network port of your SnapGear
unit to your cable modem. Power on the cable modem and give it some time to initialize.
If fitted, ensure the Ethernet link LEDs are illuminated on both the SnapGear unit and
cable modem.
Select your cable ISP from the list and click Next. If your provider does not appear,
select Generic Cable Modem Provider. You may enter a descriptive Connection
Name if you wish. For cable modem providers other than Generic, enter your user name
and password or hostname. Click Finish or Update.
Network Setup
54