Management - Secure Computing SG300 User Manual

Management

The SnapGear unit may be management remotely using Secure Computing Global
Command Center (GCC), Secure Computing Centralized Management Server (CMS) or
Simple Network Management Protocol (SNMP).
GCC
To enable remote management by a Secure Computing Global Command Center server,
check Enable Central Management.
Enter the Global Command Center Server Host Name.
Enter the Global Command Center Server IP Address. This may be left blank if you
want to use DNS name resolution to connect to the Global Command Center server.
If you have a secondary Global Command Center server, enter its name in Secondary
Host Name so the SnapGear unit's firewall can be updated appropriately.
Enter the IP address of the secondary Global Command Center server in Secondary IP
Address if applicable.
Clicking Submit requests a certificate from the Global Command Center server. With the
appropriate credentials, you are able to download the appropriate certificates enabling
this device to be managed.
System
279