System - Secure Computing SG300 User Manual

System

To configure the SnapGear unit's network system settings, click the System tab on the
Network Setup page. These settings control the SnapGear unit's identity on the
network.
Hostname
The Hostname is a descriptive name for the SnapGear unit on the network. It is also
used as the SNMP sysName field. By default, this is set to the model name of your
SnapGear unit, e.g. SG710.
If network shares or printers are being shared, this is the computer name that is
displayed when browsing the network from a Windows PC (SG565 only).
Workgroup/domain
Note
SG565 only.
The Workgroup/Domain is the Windows workgroup or domain with which to share
printers or network shares. These shared resources are not visible to machines on the
LAN that are not members of this workgroup or domain.
Administrative contact
You may enter the email address of the local administrator of the SnapGear unit for use
as the SNMP sysContact field.
Device location
You may enter a short description of the physical location of the SnapGear unit for use as
the SNMP sysLocation field.
Network Setup
115