Configuration Files - Secure Computing SG300 User Manual

Note
Although we recommend it, this program is not supported by Secure Computing.
Download the binary image file (.sgu). Contact SG technical support for instructions on
obtaining this file. Place this file in the directory your TFTP is serving files from, usually:
/tftpboot/
Establish a telnet or ssh connection to the SnapGear unit. Login and run the command:
flash image <TFTP server address> <image.sgu>
.. where <TFTP server address> is the address of your TFTP server, and <image.sgu> is
the binary image filename. Your telnet or ssh connection is terminated once the upgrade
commences.

Configuration Files

To manually edit, view, or upload new configuration files, select Advanced from the
System section of the main menu and click the Configuration Files tab.
Warning
Manually modifying or deleting your SnapGear unit's configuration files may render the
unit inoperable until a factory reset has been performed.
Edit files
To modify multiple files at once, check the Filenames and click Modify. To edit a single
file, click its Edit icon.
System
289