Usb; Usb Mass Storage Devices - Secure Computing SG300 User Manual

Note
SG565 only.
The SG565 has two USB (Universal Serial Bus) ports to which you can attach USB
storage devices (e.g. hard drives, flash drives, card readers), USB printers, USB network
devices and USB narrowband (non-DSL) modems. A USB hub may be used if you need
to attach more than two USB devices simultaneously.
Note
USB DSL modems are not supported at this time.
The following walks you through configuring your SnapGear unit to use the
aforementioned USB devices, and how to share printers and network attached storage
with a Windows network.
Attach the USB device
Ensure that the USB device is connected using a USB cable and that the device is
powered on. Some USB devices, such as USB flash drives, draw their power directly
from the USB port, others may require a separate power adapter.

USB Mass Storage Devices

USB mass storage devices can be attached to the SnapGear unit for use as a print spool
or to share with your Windows network as a network attached storage device (NAS). A
typical use for NAS is for using the SnapGear unit as a network file server.
USB mass storage devices include USB flash drives and keychains, USB flash card
readers loaded with flash cards, USB hard drives, and certain digital cameras and
portable music players.

USB

6. USB
254