Advanced; Reboot And Reset - Secure Computing SG300 User Manual

Advanced

The following options are intended for network administrators and advanced users only.
Warning
Altering the advanced configuration settings may render your SnapGear unit inoperable.

Reboot and Reset

Rebooting does not erase your SnapGear unit's configuration, however network
connections such as your Internet connection, VPN tunnels, etc. are terminated and re-
established when the device is up and running again.
Warning
Before restoring your SnapGear unit to its default factory settings via the web
management console or reset button, it is strongly recommended that you create a back
up of your configuration. Refer to the Save/Restore section earlier in this chapter for
details.
Reboot device
Click Reboot Now to have the SnapGear unit to perform a soft reboot. It usually takes
around 10 seconds before it is up and running again.
If you have enabled bridging, the SnapGear unit may take up to 30 seconds to reboot.
Any shared printers take 30 seconds to become available, during which time print jobs
are not accepted.
Erase configuration
To erase your SnapGear unit's configuration and return to the factory default settings,
click Erase Configuration. This is useful if you want to reconfigure the device form
scratch after an upgrade, or want to redeploy the device into a different environment.
System
286