Oce 9700 User Manual page 73

It is also possible to adjust the length of both the leading and trailing edge to
eliminate or add a filing strip. It is also possible to adjust the length of both the
leading and trailing edge to eliminate or add a filing strip. Leading and trailing
edge can be extended up to 400 mm or shortened up to 100 millimetres (see
figure 64).
[64] Example of adjusting the leading/trailing edge of an original
Copying with removed filing strips along the leading and trailing edge
Open the 'Copy size' card in the 'Copy' section.
1
Press the function button 'Remove strip' (see figure 65).
2
Copies:
Ready to copy
0
Image
Special
original
Copy
material
......................................................................................................................................
Copy
size
[65] Removing strip
Adjust the values in millimetres for the trailing edge using the numeric or the
3
higher/lower buttons.
Press the function button 'Remove strip' again.
4
Adjust the values in millimetres for the leading edge using the numeric or the
5
higher/lower buttons.
Make other settings as required.
6
Feed the original.
7
Special copy jobs
Leading edge:
- 40 mm
Trailing edge:
- 40 mm
................
Machine
A4 >> A2
A3 >>
A2
210 mm
A2
A2 >>
A1 >> A2 Standard cut
A2
A0 >> Synchro cut
Auto format Copy
selection selection length
length
Leading edge:
+40 mm
Trailing edge:
+ 40 mm
................
................
Program Finishing
0 mm
40 mm
Remove
strip
................
Copy
0 mm
0 mm
Add
strip
73