Material Safety Data Sheet - Oce 9700 User Manual

MATERIAL SAFETY DATA SHEET

(93/112/EEC and ISO 11014-1)
Océ E1 Toner
9. Physical and chemical properties
Explosion limits (dust explosion) LEL 60
Appearance and odour
Boiling point (
Vapour density (air = 1)
Solubility in water
Vapour pressure
Other characteristics
10. Stability and reactivity
Thermal decomposition
Hazardous decomposition products
Hazardous reaction
Combustion products
11. Toxicological information
Inhalation
Skin
Eyes
Ingestion
Mutagenicity
12. Ecological information
This product is not biodegradable.
The ingredients are not classified as ecologically hazardous. No adverse environmental effects are expected.
13. Disposal considerations
Pack waste dustproof to prevent dusting. With due observance of local laws and regulations, dispose of by burial in a sanitary landfill or
incineration. Do not throw in open fire, in order to prevent the risk of a dust explosion.
14. Transport information
This product is not classified as a dangerous substance according to the international transport regulations.
15. Regulatory information
This product is not classified as a dangerous preparation according to the European Directives 67/548/EEC and 88/379/EEC for the
classification, packaging and labelling of dangerous substances and preparations.
Therefore, indications of special risks or safety advice on the packing are not prescribed for this product.
16. Other information
Use: ink powder for printers.
Room ventilation: see operator manual or safety data sheet for the printer.
This MSDS replaces MSDS E-179 for Océ 9800 Toner.
Revision of E-198-a-UK dated March 1997.
Modifications: information on ingredients changed.
©1998 Océ-Technologies B.V.
The content of this safety data sheet is subject to the disclaimer on page 196 of
this manual.
204 Océ 9700 Copier/Printer User Manual
3
g/m . UEL U (= unknown)
Black powder, faint odour
o
C) N.A
N.A.
Insoluble
N.A.
N.A.
None
* At high concentration in air the powder may cause discomfort of upper respiratory system.
* No adverse health effects are expected.
* Dust may cause discomfort in the same manner as nuisance dust.
* Considered relatively harmless.
No mutagenicity detected in Ames test.
* These statements are based on toxicological literature on the ingredients of this product and test results of similar
products.
Number E-198-b-UK
Date July 1997
Page 2 of 2
o
Flash point ( C)
o
Ignition temperature ( C)
3
Bulk density (kg/m )
o
Softening point ( C) Approx. 50
Evaporation rate (butyl acetate = 1)
% Volatile
pH (solution)
o
Above approx. 450 C
None at intended use
Carbon dioxide, carbon monoxide, water
N.A. (=Not Applicable)
U
ca 1000
N.A.
0
N.A.