Oce 9700 User Manual page 56

Adjusting the side guides of the belts
Loosen the knurled nuts (see figure 46).
1
[46] Adjusting the side guides of the belts
Adjust the plate according the width of the fold package.
2
Tighten the knurled nuts.
3
If you change the folding width and/or the folding length, you have to adjust
the punching unit.
Adjusting the punching unit
Open the front door of the high capacity output unit.
1
Turn the black knob to adjust the folding width (see figure 47). Refer to the
2
sticker inside the unit.
[47] Knob to adjust the folding width in the punch unit
56 Océ 9700 Copier/Printer User Manual