Clearing original jams
When during scanning an original jams, the message 'original jam' will appear
on the scanner display. You must remove the original from the scanner.
Removing a jammed original
Open the top cover of the scanner (see figure 152).
1
[152] Opening the top cover of the scanner
Remove the original.
2
Lift the top cover of the scanner to release the lock of the hinge, and close the
3
cover (see figure 153).
[153] Closing the top cover of the scanner
If applicable, smooth out the original and feed it again.
4
If an original misfeed occurs frequently:
Problem solving
153