Copy Material That Can Be Used; Reinforcement Strips - Oce 9700 User Manual

Copy material that can be used

Océ machines and materials are matched for optimal quality and performance.
It is therefore recommended to use only approved Océ materials in the
Océ 9700.
A full list of Océ materials suited for use in the Océ 9700, including plain
paper, transparent paper, coloured papers and various polyester films is
available from your Océ representative.
Plain paper
Transparent paper
Vellum
Polyester film
Width
Length
[199] Overview of copy material that can be used
Attention:
are high. Also, avoid dust and direct sunlight. Wrap unused paper in plastic
to prevent it absorbing moisture.

Reinforcement strips

Information about the different reinforcement strips is available from your Océ
representative.
Attention:
damage to the Reinforcement Unit.
184 Océ 9700 Copier/Printer User Manual
60 - 110 g/m
95 g/m
16 - 20 lbs
3.3 - 3.5 mil
Minimum
297 mm
210 mm
Avoid storing paper in rooms where temperature and humidity
Only use the original Reinforcement Strips from Océ, to avoid
2
2
Maximum
920 mm
6 m, depending on memory
configuration