Editing The Stamp - Oce 9700 User Manual

Editing the stamp

Stamps are pre-defined strings of text. This information may be any sequence
of characters. Also date and time are at your disposal. If you select the symbol
then the current date will be printed. The symbol
print the time. If you want to use a space, select the space located to the right
of the Z character.
If you have selected date and/or time the actual date and/or time will be
Note:
printed on your output.
By selecting a stamp, users can print this information on the copy. The key
operator, is allowed to define up to 50 stamps. The procedure below shows how
to do so.
Editing the stamp
Open the 'Stamp' card in the 'Finishing' section.
1
Copies:
Ready to copy
0
High cap.
stacker
Stamp
Fold
delivery
......................................................................................................................................
Fold
[88] Stamp card
Press the function button 'Stamp' to select 'Select' and then the higher/lower
2
buttons to select the stamp you want to change.
Press the function button 'Stamp' again to select 'Edit' (see figure 88).
3
With the function button to the right
4
cursor to select a character.
Press the function button 'Write character' to include the selected character in
5
your stamp.
If you want to delete the last entered character in the stamp, then press the
6
function button 'Erase character'.
Edit the stamp as required.
7
When ready, quit the key operator mode.
8
Key operator
1
Edit
Layout
Select
Write
Stamp
character
................ ................
Machine Program
Erase
character
or to the left
will be used to
................
................
Copy
Finishing
you can move the
97