Table of Contents
Advertisement
Reinforcing is only possible with the Standard folding method. When you
Note:
select reinforcing with another folder setting method the following message
will appear on the display: 'Reinforcing only possible with Standard folding
method'. As soon as you make another selection this message disappears.
When feeding reinforced originals into the scanner you have to fold
Note:
down the reinforcement strip so that it no longer sticks out of the page.
For more information about inserting a new tape roll and other
Note:
maintenance issues, see 'Maintenance of the Reinforcement Unit' on
page 139.
When reinforcing is disabled by some mechanical failure you can still
Note:
make copies or prints. When you select reinforcing the following message is
displayed: 'Reinforcing not possible'. After a few seconds this message
disappears and reinforcing is deselected. For more information see 'Solving
problems with the Reinforcement Unit' on page 174.
Basic copy jobs
59
Advertisement
Table of Contents
