T S - 2 0 0 U S E R G U I D E
HEADSET OPERATION (OPTIONAL)
If you are using a headset, you will need to configure your telephone to operate
in headset mode. Configuring the TS-200 for headset mode allows you to place
calls using the headset without the need to lift the handset.
The TS-200 supports 2 types of headsets:
Headsets with RJ22 (handset) connectors
Installing headsets with RJ22 connectors
Note: In order to use a headset with an RJ22 connector, you will need an external
controller/amplifier to switch between handset and headset.
1. Connect your headset to the phone.
• Disconnect the handset from the handset jack on the left of the phone.
• Plug your headset controller into the handset jack.
• Plug the handset into the headset controller.
2. Configure the phone for headset mode.
• Press the
• Press the
• Press the
• Press the
• Press the
• Press and hold the
6
OPTIONS
button.
3
key for HEADSET
SELECT
softkey.
CHNG
softkey to turn headset mode on.
SAVE
softkey.
button to exit the option menus.
Headsets with 2.5mm connectors
W W W.T A L K S W I T C H . C O M