Customizing Wireless Wep Encryption - Ruckus Wireless ZoneFlex 2925 User Manual

Ruckus Wireless ZoneFlex 2925/2942 User Guide | After the Installation (Post-Installation Setup)
Threshold Settings
Encryption Method
4
When you are finished, click Update Settings to save and apply the changes.
A confirmation message appears at the top of this workspace.
5
Click Go back to Wireless Configuration to reopen the previous workspace.

Customizing Wireless WEP Encryption

ALERT
To configure hotspot-specific WEP encryption settings, follow these steps:
1
Open the Web User interface, and click Wireless under Configuration.
2
When the Configure::Wireless::Common workspace appears, click a hotspot-specific
tab.
3
When the Configure::Wireless::Wireless [#] workspace appears, open the Encryption
Method menu and choose WEP.
somehow indicates your location or group name. The "name"
can be up to 32 characters in length, containing letters and
numbers, and is case-sensitive.
This button opens a workspace where you can configure the Pro-
tection Mode you activated in the Wireless::Common work-
space. If Protection Mode is not active, ignore this option.
For more information, see "Setting Threshold Options" on
page 27.
By default, all data exchanges in your wireless network are not
encrypted, but you can pick an encryption method in this
option, and use the extra workspace features that appear to
fine-tune the encryption.
For more information, see either "Customizing Wireless WEP
Encryption" on page 30 or "Customizing Wireless WPA Encryp-
tion" on page 32.
Do not undertake the customizing of these options unless you are an experienced network
administrator or are under the guidance of an IT/support professional.
30