Installing the XM Series Inverter
Safety Instructions
Installation Tools and Materials
Tools
975-0263-01-01
Do not proceed with the installation of your XM Series Inverter until you
have read the section "Designing Your Installation" on page 3–1. The
more thorough your planning, the better your power needs will be met to
achieve maximum performance from your XM Series Inverter.
Before you start to install the XM Series Inverter:
•
Review the "Important Safety Instructions" on page v.
•
Do not attempt your own AC wiring unless you have the knowledge,
tools, and experience to do a safe job. Because installation requires
compliance with various codes, installers should be certified
technicians or electricians.
•
Read and follow all Warnings and Cautions in this chapter.
Important:
If you have any installation questions or issues, please contact
Customer Service. Contact information is available in "Warranty" on page WA–1.
•
Wire stripper
•
Wrench for DC terminals and ground stud
•
Screwdrivers—1/8" slot-head and Phillips
•
Crimping tool for fastening lugs and terminals on DC cables.
(You may find it more convenient to have the crimp connectors
installed onto the DC cable by the store that sells you the cable and/or
connectors.)
Installing the XM Series Inverter
3–9