Engine Oil Cooler; Transmission; Shifting Gears; Transmission Shifting - E-TON CXL-150 Owner's Manual

Oil Cooler
The engine oil is cooled by pumping the oil
through an external oil cooling radiator located
at the front of the unit. It is important that the
cooling fins of the radiator be kept clean of dirt
build up to prevent engine overheating.
Remove any build up of mud and dirt from the
cooling unit with a pressurized spray of water.
.
Inspect the Oil cooler line for leaks and
damage. Replace any damaged lines and
repair any leaking connections before starting
the engine.
Copyright ©2008-2009 ETON America, all rights reserved.

Transmission

Your ATV is equipped with a fully automatic
C.V.T. transmission and has forward and
reverse gearing. A transmission shifting shaft
is located on the right hand side of your engine.
The shifter has three positions "F" Forward, "N"
Neutral and "R" Reverse.
The instrument panel has three lights that
correspond to the transmission shifter shaft
position.
The transmission must be placed in the "N"
(neutral – Green indicator Lamp) to start the
engine.
Page 12
Shifting