Turning; Parking - E-TON CXL-150 Owner's Manual

Turning your ATV
Learning to turn your ATV requires you to learn
to shift your weight and control the throttle to
allow the rear wheels to turn properly. When
making a turn, the wheels on the outside of the
turn must travel a wider radius and thus a
greater distance than the inside wheels of the
turn. Since the rear axle does not permit a
different rate of rotation, it is not enough to
merely steer your ATV into the turn.
To turn properly, steer in the direction of the
turn and lean your body to the inside of the
turn while supporting your weight on the outer
footrest. Use the throttle to maintain power
throughout the turn.
If you do not use this turning technique the unit
will have a tendency to continue in a straight
line. If this occurs, release the throttle lever to
allow the unit to stop.
Avoid braking or accelerating until you have
regained directional control.
Parking Your ATV
1. Always park your ATV on a level
surface.
2. Turn the ignition key to the "OFF'"
position to stop the engine.
3. Set the engine stop switch to "OFF"
position.
4. Engage the parking brake locking
button.
5. Remove the ignition key to prevent
unauthorized use or theft of your ATV.
Copyright ©2008-2009 ETON America, all rights reserved.
Page 21