Cabling the G650 Media Gateways
After mounting the G650 Media Gateways in the rack, you must connect the TDM/LAN cables
between them. You must also connect CAT5 cables to the appropriate slots on the back of the
media gateways.
You can mount and cable up to five media gateways in a rack. The media gateway on the
bottom is referred to as media gateway A. The others are referred to as media gateways by
letters:
B,
●
C,
●
D, and
●
E from bottom to top.
●
When cabling the media gateways together, see the G650 TDM/LAN Cable Installation diagram
included with the shipment.
Perform these tasks to cable the G650 Media Gateway:
Cabling two media gateways
●
Cabling the third media gateway
●
Cabling the fourth media gateway
●
Cabling the fifth media gateway
●
Installing circuit packs in the G650 Media Gateway
●
Refer to the diagrams at the end of these procedures for a visual representation of G650 TDM/
LAN cable installation:
Figure 13: G650 TDM/LAN cable installation (part 1)
●
Figure 14: G650 TDM/LAN cable installation (part 2)
●
Figure 15: G650 TDM/LAN cable installation (part 3)
●
Figure 16: G650 TDM/LAN cable installation (part 4)
●
Figure 17: G650 TDM/LAN cable installation (part 5)
●
on page 54
on page 55
on page 55
on page 56
Cabling the G650 Media Gateways
on page 62
on page 57
on page 58
on page 59
on page 60
on page 61
Issue 1 February 2006
53