Mounting One G650 Media Gateway - Avaya G650 Installing

Figure 4: Setting the G650 Media Gateway carrier address ID

Mounting one G650 Media Gateway

Note:
In a multiple G650 Media Gateway configuration, put the G650s in the rack with
Note:
no vertical space between them. If the G650 Media Gateways are not mounted
adjacent with their fronts in the same vertical plane, the TDM/LAN cable(s)
cannot connect them.
Note:
Avaya recommends that the first G650 Media Gateway be installed in the lowest
Note:
position as carrier A. For more information, see
stack (A through E) that is installed next to the media server rack
This facilities mounting carriers B through E directly above carrier A.
To mount one G650 Media Gateway:
1. Remove the G650 Media Gateway door by opening and then lifting it straight up and off the
hinge pins.
!
WARNING:
When handling circuit packs or any components of the G650 Media Gateway,
WARNING:
always wear an authorized wrist ground strap connected to the ground connector
provided on the G650. Always store the circuit packs to protect them from
damage by electrostatic discharge.
E
D
C
B
A
-48 VDC
-48 VDC RETURN
Installing the G650 Media Gateway
E
D
C
B
A
swdlpdle LAO 072403
Figure 2: G650 Media Gateway
on page 32.
Issue 1 February 2006 35