About This Documentation
Overview
This documentation, Installing the Avaya G650 Media Gateway provides procedures for
installing a G650 Media Gateway, connecting it to the customer's network, and testing the
complete configuration.
The G650 Media Gateway provides card slots for up to 14 TN-type circuit packs, redundant,
hot-swappable power supplies, and AC or DC power. The backplane can support 14 circuit
packs, 2 power supplies, and provides monitoring of system fans, power supplies, and
temperature. Up to five G650 Media Gateways can be mounted in an EIA-310 standard 19-inch
(48 cm) rack.
Audience
This documentation is for the following audiences:
Trained field installation
●
Technical support personnel
●
Authorized Business Partners
●
Using this documentation
Use this documentation as a guide to install and administer the G650 Media Gateway. For
information about a particular task, use the index or table of contents to locate the page number
where the information is described.
For an overview of the installation process, see
process
on page 18.
For initial installation of hardware, see Quick Start for Hardware Installation: Avaya S8500
Media Server (555-245-701) or Quick Start for Hardware Installation: Avaya S8700 Series
Media Servers (555-245-703) a quick reference guide.
Use the remaining sections of the document in the sequence they are presented. If certain
components are not to be installed, skip the procedures for those components.
High-level overview of the installation
Issue 1 February 2006
7