Table of Contents
Advertisement
P an/t ilt Lo c k
This fixture has locking Pan/Tilt function. This is a feature designed to be used during transportation. Follow the below
instructions for operating this properly. These steps are for the Pan Lock.
1.
Locate the Pan Lock on the base of the yoke.
2.
Using your hand (not a tool!) rotate this either clockwise or counter-clockwise 90° degrees. It will sink into the
lock position.
3.
To release the lock, you must pull out the lock and then rotate it 90° degrees.
Note: you may lock the pan/tilt of the fixture in several positions along the axis.
Note: you MUST disengage the pan/tilt lock before applying power to the fixture!
Intimidator™ Spot 250 User Manual
15
Tilt lock
Tilt lock
Pan lock
Tilt lock
8/24/2009 3:19 PM
Hide quick links:
Advertisement
Table of Contents
