Table of Contents
Advertisement
Pan Operation
Tilt Operation
Pan/Tilt Angle
Range
Display
Reset Software
Load Factory
Defaults
Page 22 of 27
To select whether you want the Intimidator™ Spot Duo 150 to operate with normal
panning or inverted panning, do the following:
Head 1:
1.
Press <MENU> repeatedly until PA1 (normal pan operation) or
rPA1 (reverse pan operation) shows on the display.
2.
Use <UP> or <DOWN> to select the desired pan operation.
3.
Press <ENTER>.
Head 2:
Repeat steps 1 to 3 with the options PA2 and rPA2 for Head 2's pan operation.
To select whether you want the Intimidator™ Spot Duo 150 to operate with normal tilting
or inverted tilting, do the following:
Head 1:
1.
Press <MENU> repeatedly until ti1 (normal tilt operation) or
rti1 (reverse tilt operation) shows on the display.
2.
Use <UP> or <DOWN> to select the desired tilt operation.
3.
Press <ENTER>.
Head 2:
Repeat steps 1 to 3 with the options ti2 and rti2 for Head 2's tilt operation.
You are able to select the range for the pan and tilt angles on the Intimidator™ Spot Duo
150 to achieve the effect you like.
To select which pan angle range to use, follow the instructions below.
1.
Press <MENU> repeatedly until either PA36 (0–360° range) or
PA18 (0–180° range) shows on the display.
2.
Use <UP> or <DOWN> to select the desired pan range.
3.
Press <ENTER>.
To select which tilt angle range to use, do the following.
1.
Press <MENU> repeatedly until ti27 (0–270°), ti18 (0–180°),
or ti 9 (0–90°) shows on the display.
2.
Use <UP> or <DOWN> to select the desired tilt range.
3.
Press <ENTER>.
You are able to flip the display for easy readability in any mounting situation.
To select your display angle:
1.
Press <MENU> repeatedly until diS (normal display) or rdiS (inverted display)
shows on the display.
2.
Press <UP> or <DOWN> to select desired display.
3.
Press <ENTER>.
To reset the software on the Intimidator™ Spot Duo 150, do the following:
1.
Press <MENU> and until rESt shows on the display.
2.
Press <ENTER>.
To load the factory default settings on the Intimidator™ Spot Duo 150, do the following:
1.
Press <MENU> until LoAd shows on the display.
2.
Press <ENTER>.
Intimidator™ Spot Duo 150 User Manual Rev. 1
Advertisement
Table of Contents
