Table of Contents
Advertisement
Menu Map
M
enu Functions
M
O
ENU
PTION
User Configurations
T O SET T H E P A N T O I N V
1)
Press <MODE/ESC> until
scroll through the two options.
Stage Mover Manual
D
ESCRIPTION
DMX: The fixture will be controlled by a DMX signal coming from a DMX controller.
The starting addr
ess must be selected, and can be set using the up and down
buttons.
Stand Alone – Automatic: The built in programs will trigger automatically to a pre-
programmed speed time.
Sound Active – Master Unit: Sets the fixture to Master status for Master-Slave
operation and the built in programs will be triggered by the sound. No data link is
required; all fixtures can be set to this mode for Stand-alone operation.
Slave Unit: Sets the fixture to run in sync with the Master. You must set the first
fixture in the data link to "Master" otherwise nothing will happen.
ER TING OR NON- IN VERT ING:
11
is displayed. Use the <UP> and <DOWN> buttons to
is non-inverting;
is inverting.
2007-04-13/09:39
Advertisement
Table of Contents
