Table of Contents
Advertisement
O
PERATION
4. O
PERATION
Control Panel Operation
B
F
UTTON
UNCTION
<MENU> Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value in to the current
<ENTER>
function
<UP>
Navigates upward through the menu list or increases the numeric value when in a function
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function
Control Options
Set the STRIKE 1 starting address in the 001-512 DMX range. This enables control of up to 102 products
in the 5-channel 5 Ch personality.
Programming
Refer to the Menu Map to understand the menu options. The menu map shows the main level and a
variable number of programming levels for each option.
•
To go to the desired main level, press <MENU> repeatedly until the option shows on the display.
Press <ENTER> to select. This will take you to the first programming level for that option.
•
To select an option or value within the current programming level, press <UP> or <DOWN> until
the option shows on the display. Press <ENTER> to select. In this case, if there is another
programming level, you will see that first option, or you will see the selected value.
•
Press <MENU> repeatedly to exit to the previous main level.
Control Panel Lock
This setting enables you to activate or disable the control panel lock, which keeps unauthorized users from
changing the product's settings.
1.
Go to the Key Lock main level.
2.
Select On or Off.
When the control panel lock is activated, in order to access the products main
programming level, the product will prompt for the passcode. Enter the
passcode as described below.
Passcode
After being prompted to enter the passcode:
Press <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
Menu Map
M
L
P
AIN
EVEL
ROGRAMMING
DMX Address
Address
DMX Channel
Dimmer
Static
Strobe
Auto Show
Auto 1–3
Red Shift
Master/Slave
Mode
STRIKE 1 User Manual Rev. 2
L
D
EVELS
ESCRIPTION
Selects DMX address (highest channel restricted to
<000–512>
personality chosen).
2 Ch
2-channel: dimmer, red shift
3 Ch
3-channel: 16-bit dimmer, red shift
4 Ch
4-channel: dimmer, red shift, strobe, auto
5 Ch
5-channel: 16-bit dimmer, red shift, strobe, auto
Sets the intensity of the light output
<0–255>
Selects the strobe frequency
<001–100>
Automatic programs and speed
On
Turns Red Shift (amber LEDs imitate lamp when
dimming) on or off
Off
Master
Master mode
Slave
DMX slave mode
Page 9 of 17
Advertisement
Table of Contents
