Chime Options - 2gig Technologies Go!Control 2GIG-CNTRL2 User Manual

System Toolbox

Chime Options

On doors and windows monitored by sensors, the system can sound a chime to announce that the
door or window was opened. Sensors can also be set to have the Control Panel say the name of the
opening. The chime and voice announcements only sound while the system is disarmed.
At the time of installation, the installer sets up each sensor's standard chime option. The person with the
Master User Code can change the chime options for each sensor to further customize the system as desired.
✓ NOTE: As a global system option, the chimes for all the system's sensors can be turned
on or off using the CHIME check box on the Menu Screen.
To setup the chime options individually for each
sensor, use the following steps:
1. On the Home Screen, press SECURITY.
2. On the Security Screen, press MENU.
3. Note the two check boxes on the Menu
Screen. The CHIME check box button
turns the chimes on or off for all the
system's sensors. The VOICE check box
button turns the voice announcements
for the system's messages on or off
(except alarm voice messages).
4. On the Menu Screen, press TOOLBOX.
5. Enter the Master User Code
to access the toolbox.
6. On the Toolbox Screen (1 of 3),
press CHIME SETUP.
7. The Chime Setup Screen will display
each of the installed sensors that can
chime and the option currently set for
the sensor. Press the sensor button to
change the sensor's chime options.
8. There are 14 chime options for each
sensor. Check the option that you
want for the sensor, then press OK.
9. Press BACK when fi nished.
1 Disabled
2 Voice Only
3 Ding-dong #1
4 Ding-dong with Voice #1
5 Ding-dong #2
6 Ding-dong with Voice #2
7 Ding-dong #3
38
Menu Screen Global Chime Option Box
CHIME OPTIONS
8 Ding-dong with Voice #3
9 Ding-ding
10 Ding-ding with Voice
11 Chime #1
12 Chime with Voice #1
13 Chime #2
14 Chime with Voice #2
Toolbox Screen One
Chime Setup Screen
Chime Option Screen