Setting Up Individual Reply - Standard Horizon HX850S Owner's Manual

the [ CALL ( ENT ) MENU ] key to move to the next space. This method can
also be used to enter a blank space in the name. If a mistake was made
entering in the name repeatedly press the [ H/L (
character is selected, then press the [ ] / [ ] key to correct the entry.
9. After the eleventh letter or space has been entered,
press and hold the [ CALL ( ENT ) MENU ] key to advance
to the MMSI (Maritime Mobile Service Identity Num-
ber) number entry.
10. Press the [ ] / [ ] key to scroll through numbers, 0-9.
To enter the desired number and move one space to
the right press the [ CALL ( ENT ) MENU ] key. Repeat this
procedure until all nine space of the MMSI number are
entered.
11. If a mistake was made entering in the MMSI number repeat pressing the
[ H/L ( )] key until the wrong number is selected, then press the [ ] / [ ]
key to correct the entry.
12. To store the data entered, press and hold the [ CALL ( ENT ) MENU ] key.
13. To enter another individual address, repeat steps 5 through 12.
14. Press the [ CLR ( MEM )] key twice to return to the "Setup Menu
the [ CLR ( MEM )] key again to return to radio operation.

7.5.2 SETTING UP INDIVIDUAL REPLY

Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual Call requesting you to switch to a working channel
for voice communications. When "Manual" is selected the MMSI of the calling
vessel is shown allowing you to see who is calling. This function is similar to
caller id on a cellular phone.
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu Setup Menu" appears.
Setup Menu Setup Menu Setup Menu
2. Press the [ ] key to select "DSC Setup
3. Press the [ CALL ( ENT ) MENU ] key, then select
Individual Reply" with the [ ] / [ ] key.
"Individual Reply
Individual Reply Individual Reply Individual Reply
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select "Automatic
6. Press the [ CALL ( ENT ) MENU ] key to store the selected
setting.
7. Press the [ CLR ( MEM )] key twice to return to radio op-
eration.
Page 38
DSC Setup" menu.
DSC Setup DSC Setup
DSC Setup
Automatic" or "Manual
Automatic Automatic
Automatic
)] key until the wrong
Setup Menu", then press
Setup Menu Setup Menu
Setup Menu
Manual Manual
Manual". Manual
HX850S