Position Report; Setting Up A Position Report Ringer - Standard Horizon HX850S Owner's Manual

7.9 POSITION REPORT

The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to
another vessel. Your HX850S must activate the internal GPS receiver.
To transmit a Position Send Call, you must setup the HX850S DSC Indi-
vidual / Position Call Directory with the name of the vessel(s) or person
and the MMSI of the DSC radio you wish to send your position to. To
setup this directory refer to section "7.5.1 SETTING UP THE INDIVIDUAL
/ POSITION CALL DIRECTORY".

7.9.1 SETTING UP A POSITION REPORT RINGER

The HX850S has the capability to turn off the Position Report ringer.
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu Setup Menu" appears.
Setup Menu Setup Menu
Setup Menu
2. Press the [ ] key to select "DSC Setup
3. Press the [ CALL ( ENT ) MENU ] key, then select
DSC Beep" with the [ ] / [ ] key.
"DSC Beep
DSC Beep DSC Beep
DSC Beep
4. Press the [ CALL ( ENT ) MENU ] key, then select
Position Report" with the [ ] / [ ] key.
"Position Report
Position Report Position Report Position Report
5. Press the [ CALL ( ENT ) MENU ] key, then press
the [ ] key to select "Off
6. Press the [ CALL ( ENT ) MENU ] key to store the
selected setting.
7. Press the [ CLR ( MEM )] key twice to return to the
Setup Menu", then press the [ CLR ( MEM )] key again
"Setup Menu
Setup Menu Setup Menu
Setup Menu
to return to radio operation.
To return to enabling the ringer tone, repeat the above procedure, press the
[ ] key to select "On
HX850S
DSC Setup" menu.
DSC Setup DSC Setup
DSC Setup
Off". Off Off
Off
On" in step "5" above.
On On
On
NOTE
Page 51