Scanning; Selecting The Scan Type; Memory Scanning (M-Scan) - Standard Horizon HX850S Owner's Manual

6.9 SCANNING

The HX850S allows the user to select the scan type from "memory Scan" or
"Priority Scan". The "Memory Scan" scans the channels that were programmed
into memory. The "Priority Scan" scans the channels programmed in memory
with the user selected priority channel.

6.9.1 SELECTING THE SCAN TYPE

1. Press and hold the [ CALL ( ENT ) MENU ] key until the
"Setup Menu Setup Menu" appears.
Setup Menu Setup Menu
Setup Menu
Radio Setup" with the [ ] / [ ] key, then press
2. Select "Radio Setup
Radio Setup Radio Setup
Radio Setup
the [ CALL ( ENT ) MENU ] key.
SCAN Type" with the [ ] / [ ] key, then press
3. Select "SCAN Type
SCAN Type SCAN Type
SCAN Type
the [ CALL ( ENT ) MENU ] key.
4. Select the desired Scan Type ("Memory Scan
ority Scan") with the [ ] / [ ] key.
ority Scan ority Scan ority Scan ority Scan
5. Press the [ CALL ( ENT ) MENU ] key to store the selected
setting.
6. Press the [ 16/9 ] key to exit the "Radio Setup
return to radio operation mode.
6.9.2 MEMORY SCANNING ( M-SCAN )
The "Memory Scan" scans the channels that were programmed into memory.
The HX850S can be programmed to scan channels from a minimum of 2 chan-
nels up to all channels in the marine band. If an incoming signal is detected on
one of the channels during scan, the radio will pause on that channel, allowing
you to listen to the incoming transmission.
1. Select the desired channel to be included in the scan memory using the
[ ] or [ ] key.
2. Press and hold the [ CLR ( MEM )] key until "
shown on the display, thus the current channel is stored
into the transceiver's scan memory.
3. Repeat steps 1 and 2 for all the channels to be scanned.
4. To delete a channel from the transceiver's scan memory, select the memo-
rized channel, then press and hold the [ CLR ( MEM )] key until "
moved from the display.
5. All channels programmed remain in the transceiver's scan memory even if
the power is turned off.
6. To start scanning, press the [ SCAN ( DW )] key. The scan proceeds from the
lowest to the highest programmed channel and stops scanning when a
transmission is received. Scanning will resume when the incoming signal
disappears at the end of the transmission. A "
HX850S
Memory Scan" or "Pri-
Memory Scan Memory Scan
Memory Scan
Radio Setup" menu and
Radio Setup Radio Setup Radio Setup
" icon is
Pri- Pri- Pri-
Pri-
" icon will appears at
Page 25
" is re-