Priority Scanning (P-Scan) - Standard Horizon HX850S Owner's Manual

Floating marine transceiver with gps
Table of Contents

Advertisement

the upper left of the display during scanning.
7. To stop the scan, press the [ SCAN ( DW )] key or
[ CLR ( MEM )] key.
6.9.3 PRIORITY SCANNING ( P-SCAN )
The "Priority Scan" allows the radio to "Memory Scan" while also keeping watch
on a particularly important "Priority Channel". In the default setting, Channel
16 is set as the priority channel. You may change the priority channel to the
desire channel from the Channel 16 by the "Radio Setup" menu.
Setting Up the Priority Channel
1. Press and hold the [ CALL ( ENT ) MENU ] key until the
"Setup Menu
Setup Menu" appears.
Setup Menu
Setup Menu
Setup Menu
Radio Setup" with the [ ] / [ ] key, then press
2. Select "Radio Setup
Radio Setup
Radio Setup
Radio Setup
the [ CALL ( ENT ) MENU ] key.
Priority CH" with the [ ] / [ ] key, then press
3. Select "Priority CH
Priority CH
Priority CH
Priority CH
the [ CALL ( ENT ) MENU ] key.
4. Select the desired channel to be a priority with the [ ]
/ [ ] key, then press the [ CALL ( ENT ) MENU ] key to
store the selected setting.
5. Press the [ 16/9 ] key to exit the "Radio Setup
return to radio operation mode.
A "
" icon will appears at the upper left of the display
when the priority channel is recalled.
Operation
1. Select the desired channel to be included in the scan memory using the
[ ] or [ ] key.
2. Press and hold the [ CLR ( MEM )] key until "
shown on the display, thus the current channel is stored
into the transceiver's scan memory.
3. Repeat steps 1 and 2 for all the channels to be scanned.
4. To delete a channel from the transceiver's scan memory, select the memo-
rized channel, then press and hold the [ CLR ( MEM )] key until "
moved from the display.
5. All channels programmed remain in the transceiver's scan memory even if
the power is turned off.
6. To start priority scanning, press the [ SCAN ( DW )] key. The scan proceeds
from the lowest to the highest programmed channel and stops scanning
when a transmission is received. Scanning will resume when the incoming
Page 26
Radio Setup" menu and
Radio Setup
Radio Setup
Radio Setup
" icon is
" is re-
HX850S

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents