7. When finished entering the MMSI number, press
and hold the [ CALL ( ENT ) MENU ] key.
8. Press the [ CALL ( ENT ) MENU ] key again to send
your position to the selected vessel.
9. Press the [ CALL ( ENT ) MENU ] key to return to radio
operation.
7.9.3 RECEIVING A DSC POSITION REPORT CALL
When another vessel transmits their vessels location to the HX850S the fol-
lowing will happen:
1. When a Position Report Call is received, a call-
ing alarm sounds 5 times
2. Press the [ CALL ( ENT ) MENU ] key, the position
from the vessel sending it's position will be shown
on the display and also transferred to any Standard
Horizon GPS Chart plotter if connected.
HX850S
Page 53