Standard Horizon HX850S Owner's Manual page 46

Manual Calling
You may enter a Group MMSI number manually to contact without the Setting
up a Group call number.
1. Press the [ CALL ( ENT ) MENU ] key. The "DSC Call
Menu" will appear.
Menu Menu
Menu Menu
2. Press the [
cancel, press the [ CLR ( MEM )] key.)
3. Press the [ CALL ( ENT ) MENU ] key. The transceiver will
beep, and the "Group Call
4. Press the [ ] / [ ] key to select "Manual
the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to scroll through numbers, 0-9.
To enter the desired number and move one space to
the right press the [ CALL ( ENT ) MENU ] key. Repeat this
procedure until all nine space of the MMSI number
which you want to contact are entered. If a mistake
was made entering in the MMSI number repeatedly
press the [ H/L (
lected, then press the [ ] / [ ] key to correct the en-
try.
6. When finished entering the MMSI number, press and
hold the [ CALL ( ENT ) MENU ] key. The transceiver will
beep, and the "Select Intership CH
7. Press the [ ] / [ ] key to select "Manual
the [ CALL ( ENT ) MENU ] key.
8. Press the [ ] / [ ] key to select the operating channel
you want to communicate on and press the
[ CALL ( ENT ) MENU ] key.
9. Press the [ CALL ( ENT ) MENU ] key again to
transmit the Group Call signal.
10. When the Group Call signal is sent, the display
will be as shown in the illustration at the right.
11. After the Group Call is transmitted, all the radios
in the group will switch to the designated chan-
nel.
12. Listen to the channel to make sure it is not busy,
then press the PTT switch and call the other vessels
you desire to communicate with.
Page 46
] / [ ] key to select "Group
Group Call" directory will appear.
Group Call Group Call
Group Call
)] key until the wrong number is se-
Select Intership CH" menu will appear
Select Intership CH Select Intership CH
Select Intership CH
DSC Call DSC Call
DSC Call DSC Call
Group". (To
Group Group
Group
Manual", then press
Manual Manual Manual
Manual", then press
Manual Manual Manual
HX850S