Transmitting A Position Request To Another Vessel - Standard Horizon HX850S Owner's Manual

7.8.2 TRANSMITTING A POSITION REQUEST TO ANOTHER VESSEL

Pre-Programmable Request
1. Press the [ CALL ( ENT ) MENU ] key. The "DSC Call
Menu" will appear in the display.
Menu Menu
Menu Menu
2. Press the [ ] / [
quest quest quest".
quest quest
3. Press [ CALL ( ENT ) MENU ] key to show the "Position
Request Call" directory. This directory uses the
Request Call Request Call
Request Call Request Call
"Individual Call Individual Call" directory information.
Individual Call Individual Call
Individual Call
4. Press the [ ] / [ ] key to select a name, then
press the [ CALL ( ENT ) MENU ] key.
5. Press the [ CALL ( ENT ) MENU ] key again to
transmit the Position Request DSC call.
6. When the HX850S receives the position from
the polled vessel, a ringing alarm will sound.
7. Press any key to stop the alarm.
8. Press the [ CALL ( ENT ) MENU ] key, the display
shows the position of the vessel and also trans-
ferred to the GPS Chart plotter if connected.
If the HX850S does not receive position data from the polled vessel, the
display will show "NO POSITION DATA
Manual Request
You may enter an MMSI number manually to contact without Setting up the
Individual / Position Call Directory.
1. Press the [ CALL ( ENT ) MENU ] key. The "DSC Call
Menu" will appear in the display.
Menu Menu
Menu Menu
2. Press the [ ] / [
quest quest quest quest quest".
3. Press [ CALL ( ENT ) MENU ] key to show the "Position
Request Call" directory. This directory uses the "Individual
Request Call Request Call
Request Call Request Call
Call" directory information.
Call Call Call Call
4. Press the [
press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to scroll through numbers, 0-9.
HX850S
] key to select the "Pos Re-
NO POSITION DATA NO POSITION DATA". NO POSITION DATA
NO POSITION DATA
] key to select the "Pos Re-
] / [ ] key to select the "Manual
DSC Call DSC Call DSC Call DSC Call
Pos Re- Pos Re- Pos Re-
Pos Re-
Position Position
Position Position
NOTE
DSC Call DSC Call
DSC Call DSC Call
Pos Re- Pos Re- Pos Re-
Pos Re-
Position Position Position Position
Individual Individual
Individual Individual
Manual", then
Manual Manual Manual
Page 49