Setting Up User Authentication At The Mfp (Restrict Public Access) - Muratec MFX-C2280 Feature Overview Manual

Setting Up User Authentication at the MFP
Pre-requisites:
No originals will be required . The objective of this job shop is to instruct you in setting
up an authorized user to provide them access to the MFP . This step is required
in order to access User Authentication via the Print Driver . User Authentication is set
up via Administrator Setting so you will need the Administrator password . The default
Administrator password is 1234567812345678 .
APPLICATION
User Authentication will allow Administrators and/or Office Managers the ability
to set up "passwords" and "user names" that will permit authorized end-users access
to the MFP . This will eliminate any unwarranted copying use of the unit from the MFP
control panel .
AT THE MFP
If not on the Home screen touch the Menu key on the Control Panel
1 . Touch the Utility icon .
2 . Touch Administrator
Settings .
3 . Enter Password (default
is 1234567812345678)
and touch OK .
4 . Touch User
Authentication/Account Track .
5 . Touch General Settings .
6 . Touch User Authentication .
7 . Touch Authenticate .
a . Touch ON (MFP) as the Authentication Method .
b . Touch OK .
8 . Touch Public User Access .
9 . Select Restrict .
52
The Authentication Method will vary based on
customer's needs. Overall, user authentication
set up is the same. However, additional settings
are required when External Server, MFP +
External Server or Enhanced Server are
selected as the User Authentication Method
since communication with a server is required.
Please refer to User's Manual for details and
consult with Network Administrator.
(Restrict Public Access)
.