Printing On Tabs - Muratec MFX-C2280 Feature Overview Manual

Printing on Tabs

It is recommended that this be done on Punched, Single Reverse or Reverse Collated,
5 Print On Tabs . Otherwise tabs will have to be manually reversed before printing .
The MFP will not punch holes in a print job when tabs are inserted so the entire job
must be punched with a separate device for insertion into a binder.
The MFP will only pull tabs from the Bypass Tray and pulls from the top, so the tabs
must be ordered with Tab 1 towards the front of the MFP, Tab 2 next from the front
of the MFP, Tab 3 next and so on .
AT THE DEVICE
1 . From the Copy screen touch Paper Settings .
2 . Select the Bypass Tray .
3 . Touch Change Tray Setting .
4 . Select Index Paper .
5 . Touch Close .
6 . Load Tab Paper in the Bypass Tray with the tabs facing Out .
Multiple Sets can be printed at one time.
FROM THE COMPUTER
1 . Create a blank Word document with the number of pages equaling the number
of TABS to be printed (Example: 5 tabs equals 5 blank pages) .
2 . Click File and Print .
3 . Click on Properties and go to the Basic tab on the print driver .
4 . Select the Original Size as 8½ x 11 Tab .
A Confirm Settings Change dialog box will open asking to change settings
to Paper Type = Tab and Print type = 1 Sided. Click Yes.
5 . Select the Cover Mode tab on the print driver and select Per Page Settings .
6 . Click on Edit List and select a List . It can be renamed if desired . The settings
will stay in the print driver until changed or deleted .
9