Enabling Account Track Via The Print Driver - Muratec MFX-C2280 Feature Overview Manual

Enabling Account Track via the Print Driver

Pre-requisites:
Account Track must be enabled at the MFP in order to use the Account Track feature
available in the driver .
APPLICATION
The ability to track usage by end-user is a requirement in those environments that
wish to track costs or chargeback the end user and/or department . When Account
Track has been enabled on the device, the user will need the proper credentials to
print to the device in order for the prints to be applied against the limit that has been
established for them . If no limit has been set, then account track is used to track
the number of copies and/or prints that have been generated .
This setting allows the user to set the account track
information in the Print Driver Properties screen so
that the user doesn't have to enter their credentials
every time they send a print job to the device .
1 . Click Start .
2 . Click Settings .
3 . Click Printers And Faxes .
4 . Right Click on desired bizhub MFP Printer .
5 . Select Printer Properties .
6 . Select Configure Tab .
7 . Highlight Account Track in Device Option window .
8 . In the Setting Menu,
select Enable (If Account
Track has been enabled
at the MFP, this setting
will already be enabled
in the Print Driver) .
9 . Click OK .
10 . Exit from Printer
and Faxes .
50
The steps required to access
the Printer (and Fax) Settings
will vary based on the Windows
operating System.