Multi Page Tri-Fold Creation - Pcl Print Driver - Muratec MFX-C2280 Feature Overview Manual

Multi Page Tri-fold Creation — PCL Print Driver
Pre-requisites
NOTE: The tri-fold function cannot be specified when the staple, punch, or saddle
stitch function is specified.
APPLICATION
Sometimes an end user will have a multi page document prepared for folding such
as a letter or letter with a flyer or a rebate special, etc . They may want to print this
document, either single-sided or double-sided and apply a tri-fold to finish the
document for placing in envelopes . They want to place the image(s) of their digital
file on Letter Size Paper (8 .5" x 11") .
PROCEDURE
Open or create a 3-page original document; the page size must be 8.5" x 11" .
Paper must be installed in one of the drawers or the Bypass Tray Landscaped (SEF) .
TO SET UP A TRI-FOLD IN PRINT MODE
NOTE: You can specify the procedure for adjusting the binding position
for duplex printing.
If "Prioritize Arranging Papers" is selected, all pages can be processed to a suitable
quality by this machine because the binding position is adjusted after all the print data
is received . If "Prioritize Productivity" is selected, the printing process is performed
efficiently because the binding position is adjusted while the data is printed
simultaneously as it is being received . If you want to increase the print efficiency,
select "Prioritize Productivity . "
27