Setting Up Account Track At The Mfp - Muratec MFX-C2280 Feature Overview Manual

Setting Up Account Track at the MFP

Pre-requisites:
No originals will be required . The objective of this job shop is to instruct you in setting
up Account Track at the MFP . Account Track must be enabled at the MFP in order
to use the Account Track via the Print Driver (instructions provided in a separate Job
Shop) . It is also necessary to enable Account Track in the Print Driver (instructions
provided in a separate Job Shop) .
APPLICATION
The ability to track usage by end-user is a requirement in those environments that
wish to track costs or chargeback the end user and/or department . When Account
Track has been enabled on the device, the user will need the proper credentials
to print to the device in order for the prints to be applied against the limit that has
been established for them . If no limit has been set, then account track is used
to track the number of copies and/or prints that have been generated .
AT THE MFP
If not on the Home screen touch the Menu key on the Control Panel
1 . Touch the Utility icon .
2 . Touch Administrator Settings .
3 . Enter Password (default is 1234567812345678) and touch OK .
4 . Touch User Authentication/Account Track .
5 . Touch General Settings .
6 . Touch Account Track .
7 . Touch ON .
8 . Touch Account Track Input Method .
9 . Touch Account Name & Password (Password Only selection is also available) .
10 . Press to program "When # of Jobs Reach Maximum" setting .
!
a . Touch Stop Job ( when user reaches their established job limit, their jobs
will cease printing) .
b . Touch OK .
48 48
.